Parking Space Blocker Wheel Fixation Prevent Displacement Prevent
Wheels From Going Backwards
The main material of the parking lock is aluminum, which is
non-polluting and can be treated as aluminum scrap after being
scrapped.
This parking lock utilizes the friction between the rubber plate
and the ground, and thick rubber plates are installed at the bottom
of the standing surfaces on both sides. The force generated by the
friction between the rubber and the ground prevents the vehicle
from moving forward or backward. It can be easily installed and
used on up and down slopes, slopes and slippery roads. It is very
suitable for the fault inspection of temporary parking vehicles,
preventing the vehicle from slipping or displacement, and also
ensuring the safety of personnel.
With the unique stability of the triangle shape and the friction
resistance between the rubber plate and the ground with the
characteristic thickness of 3cm at the bottom, it is very good to
prevent the vehicle from backsliding or sliding on the slope.
This wheel arrester is suitable for 4 tons family car. It can be
used everywhere without piling on the ground. The occupied area is
very small, whether in use or after storage. It can be placed in
the trunk of the car and used as a common safety equipment. The
weight is very light, only 2.2kg, even ladies can operate it.
Please refer to the table below for the size
| Dimensions(unfolded) | 745*218*660mm |
| Dimensions(folded): | 151*218*816mm |
| Weight | 2.2KG |
| Color | Yellow/White (customer-specified ) |
| Package type | (4pcs/ctn)Carton (1pcs / CTN) |
The above specifications correspond to a 4-ton family car, we can
customize it according to the actual wheel size.
